Contact Us / RFQ

Bulk Truck Request Form

The bulk truck request form below is used as a starting point for supplying a quote on a truck to meet your needs. We will be happy to answer any questions and supply a more detailed description on the specifications listed. All normal product contact surfaces of the AN bin, emulsion tank, water tank, and hose reel plumbing are 304 s/s.

Show Form »

---

The bulk truck request form below is used as a starting point for supplying a quote on a truck to meet your needs. We will be happy to answer any questions and supply a more detailed description on the specifications listed. All normal product contact surfaces of the AN bin, emulsion tank, water tank, and hose reel plumbing are 304 s/s.

Name

Company

Email

Phone

---

1. Type of discharge systems
choose all that apply.

a) Overhead Auger
b) Side Auger
c) Pneumatic
d) Auger and Pump
e) Pump Only

Pneumatic Pump: Hose Length and Diameter

---

2. Discharge Rate - Enter Rate to all that Apply:

a) Augered or Pneumatic Delivered Product

Maximum
(Lbs/Kgs)/min

Minimum
(Lbs/Kgs)/min

b) Pumped Product

Maximum
(Lbs/Kgs)/min

Minimum
(Lbs/Kgs)/min

---

3. Product Configuration
Choose one.

a) AN/FO only
b) AN/FO - Emulsion (auger only)
c) AN/FO - Emulsion (pump only)
d) AN/FO - Emulsion (auger or pump)
e) Emulsion (pump only)

---

4. Capacities - Enter amount to all that apply:

a) Ammonium Nitrate
(Lbs/Kgs)

b) Fuel Oil
(Gal/Liter)

c) Emulsion
(Lbs/Kgs)

d) Gassing Agent #1
(Gal/Liter)

e) Gassing Agent #1 - Injection
Check One.

Before PC Pump
After PC Pump

f) Gassing Agent #2
(Gal/Liter)

g) Gassing Agent #2 - Injection
Check One.

Before PC Pump
After PC Pump

h) Water (for lubrication in pumping system)
(Gal/Liter)

---

5. Unit Configuration
choose all that apply.

a) Overhead Auger at Rear b) Overhead Auger Behind Cab c) Side Auger d) Hose Reel Behind Cab e) Hose Reel at Rear (discharge facing driver side) f) Hose Reel at Rear (discharge facing back) g) Hose Reel at Rear (180° swivel) h) Small Diameter Hose Reel with 150' of 1" Hose

---

6. Hose Reel Options - Enter Amount:

b) Hose Length
(ft/meter)

a) Hose Size
(in/mm)

c) Fabricate Hose Reel Frame out of Stainless Steel?

Yes
No

---

7. Control Options
Choose all that apply.

a) 100% Manual
b) On/Off Electric over Hydraulic (manual speed controls for blend ratio and delivery rate)
c) Amerind Blend Master (automatic blend ratio and delivery rate for all components)
d) Radio Remote (must be used with 6b or 6c)

8. Counter Options: (7c must be selected)

Choose as many as required.

a) Product Amount per Hole
b) Totalizer Counter - End of Day
c) Product Delivery Shut Down Counter (Replaces 8a)

---

9. Safety System for Pumping Product
Choose as many as required.

a) Pressure Switch - 275 psi shut down
b) Pressure Transducer (included on pump truck in 7c)
c) Temperature Switch
d) Temperature Probe (includes product temperature read-out)
e) No Flow Switch
f) Mechanical Burst Disc

---

10. Other Options
Choose as many as required.

a) Stainless Steel Fenders b) Stainless Steel Support Structure on AN Bin c) Hydraulic Gate Valves on AN Bin d) Air Vibrators on AN Bin e) 42" Folding Guard Rail with 4" TOE Plate (lower position is stainless steel; upper portion is aluminum) f) 42" Stainless Steel Hydraulic Guard Rail with 4" TOE Plate g) Stainless Steel Support Structure on Emulsion Tank h) Two 10# Fire Extinguishers i) Placard Holders j) Insulated Emulsion Tank and Skinned with s/s k) Insulated Gassing Tank and Skinned with s/s l) Insulated Fuel Oil Tank and Skinned with s/s m) Chassis Engine Hot Water Heater in Hydraulic Tank n) Chassis Engine Hot Water Heater in Gassing Tank o) Chassis Engine Hot Water Heater in Water Tank p) Chassis Engine Hot Water Heater in Fuel Oil Tank q) 220V Heater in Hydraulic Tank r) High Pressure Wash Down Water System s) Work Lights

Quantity of Work Lights

Location of Work Lights

t) any other options
Choose as many as required.

t) Any Additional Options Required (Explain Below)

Additional Options:

Verification No.